CNC Switchable Privacy PDLC Glass Installation

CNC Switchable Privacy PDLC Glass Installation

Set glass in a manner which produces the greatest possible degree of uniformity
in appearance.

1. Installations of the PDLC glass in dynamic frames such as operable
windows or sliding doors must meet architectural specifications.

2. Glazing to the exterior and wet interior conditions must be
wet-sealed and impervious to moisture with provisions to allow for
weeping of condensation that may infiltrate the system.

3. Pressure glazing systems without positive positioning stops are not
to be used with this glass.

4. Glazier has to place electrical connections properly to allow
access by an electrician.

5. Electrical connections must exit at the head condition of any
framing system using CNC Switchable Privacy Glass panels in wet
environment applications.

6. Cut and seal the joints of glazing gaskets in accordance with the
manufacturers' recommendations, provide watertight and airtight seal
at corners and other locations where joints are required.





The liquid crystal privacy film is made up of electrically conductive
coatings, a polymer matrix and liquid crystals. This film has
electrical wiring to be connected to a transformer to supply power for
the "on" (clear state) mode.



CNC-INTERLAYER TECH:
[Product 1]CNC-Force EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
eva@evafilms.com
[Product 2]CNC-SmartSMART FILM FOR PRIVACY SWITCHABLE GLASS
smartfilm@smartestglass.com
[Product 3]CNC-Shield PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
pvb@pvbfilm.net
Web: www.CNCglass.com www.CNCnext.com www.HelloGlass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com